Giriş
Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.
Əhəmiyyətli Təhlükəsizlik Məlumatı
Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.
- Verify that your monitor's weight and VESA pattern are within the specified limits.
- Do not exceed the maximum load capacity of 26.5 lbs per arm.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
- Use only the provided hardware.
- Kiçik hissələri uşaqlardan uzaq tutun.
Spesifikasiyalar
- Model: EGCM13B
- Ekran ölçüsü uyğunluğu: 13-34 düym
- Weight Capacity (per arm): 26.5 funt-a qədər
- VESA Uyğunluğu: 75x75 mm, 100x100 mm
- Arm Span: 33 düym
- Qütb hündürlüyü: 16.3 düym
- Hərəkət növü: Tilt, Swivel, Rotation, Articulating
- Maksimum əyilmə bucağı: 90 dərəcə
- Material: Alaşımlı Polad
- Rəng: Qara
- Montaj növü: Stolüstü montaj (C-Clamp və ya Grommet)
- C-Clamp Masa Qalınlığı: 0.39" - 3.15"
- Grommet Mount Desk Thickness: 0.39" - 2.17"
- Grommet Hole Diameter: 0.47" - 0.79"
Paketin məzmunu
Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.
- Masa Cl ilə Əsas Qütbamp/Grommet Base
- İkili Monitor Qolları
- VESA lövhələri (2x)
- Mounting Hardware (screws, washers, tools)
- Kabel İdarəetmə Klipləri
- Təlimat kitabçası
Quraşdırma və Quraşdırma
1. Desk Compatibility Check
Before installation, ensure your desk meets the following criteria:
- Material: Recommended for wooden tables.
- Alt tərəf: Preferably free of beams or panels that may interfere with installation.
- C-Clamp Qalınlıq: 0.39" - 3.15"
- Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")
2. Monitor Compatibility Check
Each monitor must meet these conditions:
- Ekran Ölçüsü: 13-34 düym
- Çəki: 26.5 funt-a qədər
- VESA montaj delikləri: 75x75 mm or 100x100 mm apart on the back of the monitor.
3. Assemble the Pole with Clamp Dəstək
Choose either C-Clamp or Grommet installation based on your desk type.
Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.
4. Assemble the Arm and Pole Wire Clips
Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.
5. Assemble VESA Plate and Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.
6. Install the Monitor to the Swivel Arm
Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).
Əməliyyat və Tənzimləmələr
The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewrahatlıq:
- Hündürlük tənzimlənməsi: cl gevşetinamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp təhlükəsiz şəkildə.
- Əymək: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
- Fırlanan: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewmüxtəlif rakurslardan.
- Fırlanma: Landşaft və portret istiqamətləri arasında keçid etmək üçün monitoru 360 dərəcə çevirin.
- Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.
Baxım
- Bütün vintləri və əlaqələri vaxtaşırı yoxlayın, onların möhkəm və etibarlı qalmasına əmin olun.
- Montajı yumşaq, d ilə təmizləyinamp parça. Aşındırıcı təmizləyicilərdən çəkinin.
- Do not disassemble the mount unless instructed to do so.
Problemlərin aradan qaldırılması
- Monitorlar səviyyəli deyil: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
- Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
- Dağ qeyri-sabit hiss edir: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.
Zəmanət və Dəstək
For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.
