Phanteks XT View Mid-Tower Gaming Chassis Instruction Manual

1. Giriş

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Əsas Xüsusiyyətlər:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Paketin məzmunu

Bütün komponentlərin paketdə olduğunu yoxlayın:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Zip bağları (30x)
  • MB/SSD Screws (30x)
  • Baş barmaqlı vintlər (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Quraşdırma və Quraşdırma

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View şassi.

3.1. Şassinin hazırlanması

1. Paketdən çıxarın: Carefully remove the chassis from its packaging.
2. Panelləri çıxarın: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Şəkil 3.1: Daxili view of the XT View chassis, ready for component installation.

3.2. Ana platanın quraşdırılması

1. Standoffları quraşdırın: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Anakartı yerləşdirin: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Təhlükəsiz Anakart: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Enerji təchizatı blokunun (PSU) quraşdırılması

1. Position PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Təhlükəsiz enerji təchizatı sistemi: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Saxlama Diskinin Quraşdırılması

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5 düymlük sərt disk: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5 düymlük SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Sürücüləri müvafiq vintlərlə bərkidin.

3.5. Expansion Card (GPU) Installation

1. Yuva örtüklərini çıxarın: Remove the necessary expansion slot covers from the rear of the chassis.
2. Kartı daxil edin: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Təhlükəsiz Kart: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Şəkil 3.2: Arxa salon view highlighting expansion slots and fan mounting points.

3.6. Fan və Radiatorların quraşdırılması

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Kabel idarəetməsi

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Şəkil 3.3: Arxa view illustrating cable management space.

3.8. Ön I/O Əlaqələri

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• USB 3.0 başlığı
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Əməliyyat Təlimatları

4.1. Gücü yandırın/söndürün

düyməsini basın Güc düyməsi located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

The front I/O panel provides convenient access to:

• 1x USB 3.0 portu
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Baxım

5.1. Toz Filtrlərinin Təmizlənməsi

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Filtrləri silin: Gently slide out or unclip the dust filters.
2. Təmiz: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Yenidən quraşdırın: Place the clean, dry filters back into their positions.

5.2. Ümumi təmizləmə

Xarici səthlər üçün yumşaq, d istifadə edinamp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Giderme

Bu bölmə qarşılaşa biləcəyiniz ümumi problemlərə toxunur.

6.1. Sistem Yandırılmır

• Güc əlaqələri: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Anakart Bağlantıları: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Ön Panel Başlığı: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Anakart Sinxronizasiyası: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Düymənin funksionallığı: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Əlaqələr: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Maneələr: Check for any cables or objects obstructing fan blades.
• Toz: Clean any dust buildup on fan blades.

7. Spesifikasiyalar

8. Dəstək və Zəmanət

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websayt:

www.phanteks.com

Refer to the Phanteks webBölgəniz üçün tətbiq olunan ən son zəmanət şərtləri və qaydaları üçün sayta daxil olun.