Sunco Lighting WR_PR8-WH-4060K-2PK

Sunco LED Shop Light Instruction Manual

Model: WR_PR8-WH-4060K-2PK

1. Giriş

Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Sunco 4ft LED Shop Light, full view

Image 1.1: Sunco 4ft LED Shop Light

2. Təhlükəsizlik Məlumatı

Yanğın, elektrik çarpması, yıxılan hissələr, kəsiklər, aşınmalar və digər təhlükələr nəticəsində ölüm, şəxsi xəsarət və ya əmlaka ziyan vurma riskini azaltmaq üçün lütfən, armatur qutusunda və üzərində olan bütün xəbərdarlıqları və təlimatları və bütün qurğu etiketlərini oxuyun.

  • XƏBƏRDARLIQ: Elektrik çarpması riski. Quraşdırmadan və ya xidmətdən əvvəl qoruyucu və ya avtomatik açarı elektrikdən ayırın.
  • XƏBƏRDARLIQ: Yanğın riski. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
  • WARNING: Risk of Injury. Quraşdırma və texniki xidmət zamanı təhlükəsizlik eynəkləri və əlcəklərdən istifadə edin.
  • Bu qurğu üçün nəzərdə tutulub yalnız daxili istifadə. Do not use in wet locations or where directly exposed to water.
  • Bu qurğudur sönməyən. Do not connect to a dimmer switch.
  • Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
  • Təchizat həcmini təmin edintage is compatible with the fixture (120V-277V).

3. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

  • 2 x Sunco LED Shop Light Fixtures
  • Mounting Equipment (Surface)

4. Quraşdırma və Quraşdırma

Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.

  1. Quraşdırma yerini hazırlayın: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
  2. Montaj avadanlığının quraşdırılması: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
  3. Telləri birləşdirin: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
  4. Təhlükəsiz Qurğu: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Three-step installation guide for Sunco LED Shop Light: Screw in housing, Connect Wires, Snap into place.

Image 4.1: Installation Steps

Daisy Chain Linkability

This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattagəlaqəli qurğuların e-si dövrənin tutumunu aşmır.

Diagram showing daisy chain linkability with a knockout punch hole for wire connection.

Image 4.2: Daisy Chain Connection Point

5. Əməliyyat Təlimatları

The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.

Selectable Color Temperature (CCT)

Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.

Comparison of 4000K, 5000K, and 6000K color temperatures in a garage setting.

Image 5.1: Selectable CCT Options

6. Baxım

The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.

  • Təmizləmə: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
  • LEDlər: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.

7. Giderme

If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:

ProblemMümkün SəbəbHəll
İşıq yanmırEnerji təchizatı yoxdur
Yanlış naqillər
CCT switch not set
Elektrik açarını və divar açarını yoxlayın.
Verify all wire connections are secure and correct.
Ensure the CCT switch is set to a valid color temperature.
İşıq titrəyirQeyri-sabit enerji təchizatı
Boş naqil bağlantısı
Enerji təchizatının sabit və göstərilən həcm daxilində olduğundan əmin oluntage aralığı.
Check all wire connections for tightness.
İşıq gözlənildiyi qədər parlaq deyilYanlış CCT parametri
Lens üzərində toz və ya zibil
Adjust the CCT switch to a brighter setting (e.g., 6000K).
Clean the lens according to maintenance instructions.

8. Spesifikasiyalar

BrendSunco İşıqlandırma
Model nömrəsiWR_PR8-WH-4060K-2PK
Məhsul Ölçüləri48"U x 8.58"W x 2.56"H
Wattage60W
Parlaqlıq7200 lümen
Səmərəlilik118 LM/W
Rəng Temperaturu (CCT)Selectable 4000K, 5000K, 6000K
Cildtage120V-277V
Dimləşdirilə bilənyox
Daxili / Xarici İstifadəYalnız daxili
Quraşdırma növüFlush Mount
Xüsusi XüsusiyyətBağlıdır
İşıq mənbəyi növüLED
MaterialAlloy Steel, Polycarbonate
Orta Ömür50,000 saat
SertifikatlarETL, FCC, RoHS
Maddələrin sayı2 (Pack)

9. Zəmanət və Dəstək

Sunco Lighting stands behind the quality of its products.

  • Zəmanət: Bu məhsul a tərəfindən dəstəklənir 3 il Zəmanət satın alındığı tarixdən. Zəmanət iddiaları üçün satınalma sübutunuzu özündə saxlayın.
  • Müştəri Dəstəyi: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.

Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.