Peg Perego City Loop & Primo Viaggio Urban Mobility Travel System

1. Məhsul bitdiview

The Peg Perego City Loop Infant Car Seat & Stroller Combo with Primo Viaggio Urban Mobility Car Seat is a compact and versatile travel system designed for seamless mobility from infancy through toddlerhood. This system offers a combination of the City Loop chassis and the Primo Viaggio Urban Mobility infant car seat, providing a complete solution for parents on the go. It emphasizes ease of use, compact storage, and robust safety features.

The Primo Viaggio Urban Mobility car seat is equipped with built-in LATCH technology, allowing installation without a separate base, and is FAA approved for air travel. The City Loop chassis features a one-handed folding mechanism for convenient storage and transport.

Figure 1.1: The Peg Perego City Loop Stroller with the Primo Viaggio Urban Mobility Car Seat securely attached, demonstrating the complete travel system.

2. Təhlükəsizlik Məlumatı

Always prioritize your child's safety. Read and understand all instructions before using the product. Failure to follow these instructions could result in serious injury or death.

2.1 Car Seat Safety

• The Primo Viaggio Urban Mobility car seat is designed for infants weighing 4 to 30 pounds and up to 32 inches in height.
• It features Kinetic Pods for enhanced side-impact protection.
• A dual-stage cushion system provides optimal support for newborns (Stage 1) and growing babies (Stagvə 2).
• The car seat is FAA approved for air travel when installed without the base using the built-in LATCH connectors or the European belt path method.
• Ensure the 5-point harness is properly adjusted and snug against your child's body. The headrest can be adjusted to six positions without re-threading.
• The extendable Pagoda Hood offers UPF 50+ protection from harmful UV rays and includes mesh netting for ventilation.

Şəkil 2.1: Ətraflı view of the Primo Viaggio Urban Mobility car seat, illustrating the EPS foam for comfort and safety, the handle acting as a rebound bar, Kinetic Pods for side-impact protection, and built-in LATCH technology.

2.2 Stroller Safety

• Always engage the parking brake when placing or removing your child from the stroller.
• Do not overload the storage basket; the maximum capacity is 11 pounds.
• İstifadədən əvvəl bütün kilidləmə mexanizmlərinin işə salındığından əmin olun.
• The stroller features high-visibility reflective trim for increased safety during low-light conditions.

3. Quraşdırma və Quraşdırma

The Peg Perego City Loop travel system is designed for straightforward assembly. The primary components are the City Loop stroller frame and the Primo Viaggio Urban Mobility infant car seat.

3.1 Unfolding the City Loop Stroller Frame

1. Place the folded stroller frame on a flat, stable surface.
2. Release any locking mechanisms that secure the frame in its folded position.
3. Lift the handle and extend the frame until it clicks into its fully open and locked position. Verify that all parts are securely locked before proceeding.

3.2 Attaching the Primo Viaggio Urban Mobility Car Seat to the City Loop Frame

1. Ensure the City Loop stroller frame is fully unfolded and locked.
2. Align the Primo Viaggio Urban Mobility car seat with the attachment points on the stroller frame. The car seat is designed to snap directly onto the chassis without the need for additional adapters.
3. Lower the car seat onto the frame until you hear an audible click, indicating it is securely latched.
4. Gently pull up on the car seat to confirm it is firmly attached to the stroller frame before placing your child in it.

4. Əməliyyat Təlimatları

4.1 Folding the City Loop Stroller

The City Loop chassis features a convenient one-handed folding mechanism for compact storage and easy transport.

1. Ensure the car seat is removed from the stroller frame.
2. Locate the folding mechanism on the stroller handle or frame.
3. Activate the mechanism and guide the stroller frame to fold inward until it locks into its compact position.
4. The folded dimensions are approximately 10.5" L x 18" W x 24.5" H, allowing it to fit in front and rear car seats without occupying trunk space. A carry shoulder strap is included for easy portability.

Figure 4.1: The City Loop stroller in its unfolded and compactly folded states, illustrating its minimal footprint and dimensions for easy storage and travel.

Figure 4.2: Step-by-step visual guide demonstrating the simple folding mechanism of the City Loop stroller.

4.2 Car Seat Installation in a Vehicle

The Primo Viaggio Urban Mobility car seat can be installed in a vehicle using either the built-in LATCH connectors or the European belt path method, without the need for a separate base.

4.2.1 MƏHLƏLİN Quraşdırılması

1. Locate the lower anchor bars in your vehicle's back seat.
2. Extend the LATCH connectors from the car seat and attach them securely to the vehicle's lower anchor bars.
3. Press down firmly on the car seat while tightening the LATCH strap to remove any slack, ensuring a snug fit. The car seat should not move more than one inch side-to-side or front-to-back at the belt path.

Şəkil 4.3: Yaxından view of the built-in LATCH connectors on the Primo Viaggio Urban Mobility car seat, designed for secure installation without a base.

4.2.2 European Belt Path Installation

1. Route the vehicle's lap and shoulder belt through the designated belt path on the car seat.
2. Buckle the seat belt and remove all slack by pressing down on the car seat and pulling the shoulder belt tight.
3. Ensure the car seat is securely installed and does not move more than one inch side-to-side or front-to-back at the belt path.

Figure 4.4: The Primo Viaggio Urban Mobility car seat correctly installed in a vehicle, demonstrating a secure fit.

4.3 Sükan çarxının tənzimlənməsi

The stroller handlebar has two height adjustments to accommodate users of different heights for comfortable strolling.

1. Locate the adjustment buttons or levers on the side of the handlebar.
2. Press the buttons/levers and simultaneously raise or lower the handlebar to your desired height.
3. Release the buttons/levers and ensure the handlebar locks securely into place.

4.4 Saxlama Səbətindən İstifadə

The City Loop stroller includes an easy-to-access storage basket with a reinforced rigid bottom, capable of holding up to 11 pounds of essentials.

• Place items evenly in the basket to maintain balance.
• Do not exceed the maximum weight capacity to prevent damage to the stroller and ensure stability.

5. Baxım və qulluq

Proper maintenance ensures the longevity and safe operation of your Peg Perego travel system.

5.1 Təmizləmə Təlimatları

• Parça komponentləri: The fabric components are 100% Polyester and can be machine washed. Refer to the care tag on individual fabric parts for specific washing instructions. Use mild detergent and cold water. Air dry only.
• Çərçivə və plastik hissələr: Wipe down the aluminum frame and plastic components with a damp parça və yumşaq sabun. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
• Təkərlər: Regularly check the wheels for debris and clean as needed. The rear wheel suspension and ball bearings are designed for smooth operation.

5.2 Saxlama

Store the travel system in a clean, dry place away from direct sunlight and extreme temperatures when not in use. The compact fold of the City Loop chassis makes storage convenient.

6. Giderme

If you encounter any issues with your Peg Perego City Loop & Primo Viaggio Urban Mobility Travel System, please refer to the following common solutions:

• Stroller not unfolding/folding smoothly: Ensure all locking mechanisms are disengaged. Check for any obstructions in the folding joints. Apply a small amount of silicone lubricant to moving parts if necessary.
• Car seat not attaching securely to stroller: Verify that the stroller frame is fully unfolded and locked. Ensure the car seat is correctly aligned with the attachment points and pushed down firmly until it clicks into place.
• Car seat not installing securely in vehicle: Double-check that the LATCH connectors are fully engaged or that the vehicle's seat belt is routed correctly through the belt path and tightened to remove all slack. The car seat should not move more than one inch in any direction at the belt path.
• Təkərlərin cırıltısı və ya sərtliyi: Clean any dirt or debris from the wheel axles. Lubricate the axles with a silicone-based spray if needed.

If problems persist, contact Peg Perego customer support for assistance.

7. Spesifikasiyalar

8. Zəmanət və Dəstək

8.1 İstehsalçı Zəmanəti

This Peg Perego product is covered by a 2 illik İstehsalçı Zəmanəti. Bu zəmanət normal istifadə zamanı material və işlənmə qüsurlarını əhatə edir. Zəmanət iddiaları üçün satınalma sübutunuzu özündə saxlayın.

8.2 Müştəri dəstəyi

For technical assistance, replacement parts, or warranty inquiries, please contact Peg Perego customer support. Refer to the official Peg Perego webən son əlaqə məlumatları və dəstək resursları üçün sayt.

Onlayn Resurslar: Visit the official Peg Perego webTez-tez verilən suallar, məhsulun qeydiyyatı və əlavə dəstək materialları üçün sayt.