Puig 21112H

Puig 21112H City Touring Scooter Windscreen Instruction Manual

Model: 21112H | Brend: Puig

1. Məhsul bitdiview

The Puig City Touring windscreen is designed to provide enhanced protection against wind, pollution, and adverse weather conditions for scooter riders. It is suitable for both urban commutes and longer journeys. Constructed from durable 3mm polycarbonate, this windscreen offers a balance of strength and lightness, contributing to riding stability and safety. The smoked finish provides a sophisticated look while maintaining clear visibility.

This windscreen is TÜV approved and ABE licensed, ensuring compliance with high safety and quality standards for public road use. Its aerodynamic design and rounded profile are engineered to optimize protection without negatively impacting vehicle maneuverability.

Puig City Touring Windscreen installed on a red Honda scooter

Image 1.1: Puig City Touring Windscreen installed on a red Honda scooter, showing its integration and appearance.

2. Quraşdırma və Quraşdırma

The Puig City Touring windscreen includes specific brackets for straightforward and secure mounting on compatible scooters. For models not explicitly listed, a universal version with a complete fitting kit is available, offering the same quality and adaptability.

2.1. Uyğun Modellər

  • HONDA SCOOPY SH350i: 2021, 2022, 2023
  • HONDA SH 125i 4T E5: 2021, 2022, 2023, 2024, 2025
  • HONDA SH 150i 4T E5: 2021, 2022, 2023, 2024, 2025
  • HONDA SH 350i E5: 2021, 2022, 2023, 2024

2.2. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğundan əmin olun:

  • Puig City Touring Windscreen (Smoked)
  • Specific mounting brackets
  • Fasteners and hardware kit
Puig City Touring Windscreen and mounting hardware components laid out

Image 2.1: All components included with the Puig City Touring Windscreen, including the smoked screen and various mounting hardware pieces.

2.3. Quraşdırma Proseduru

  1. Hazırlanması: Park the scooter on a stable, level surface. Ensure the engine is off and cool.
  2. Mövcud Komponentləri Silin (əgər varsa): If an old windscreen or fairing needs to be removed, carefully follow your scooter's service manual for removal instructions.
  3. Mötərizələr əlavə edin: Secure the specific mounting brackets to the scooter's handlebars or designated mounting points using the provided fasteners. Refer to the detailed diagram in the physical instruction sheet for precise placement.
  4. Mount Windscreen: Align the Puig City Touring windscreen with the attached brackets. Use the remaining fasteners to secure the windscreen to the brackets. Do not overtighten initially.
  5. Mövqeyi Tənzimləyin: Gently adjust the windscreen's position to ensure proper alignment and clearance.
  6. Bağlayıcıları sıxın: Once satisfied with the position, progressively tighten all fasteners. Ensure they are snug but avoid excessive force to prevent damage to the polycarbonate or mounting points.
  7. Son yoxlama: Verify that the windscreen is securely mounted and does not obstruct steering, controls, or visibility.

Note: For detailed, model-specific installation steps, always refer to the physical instruction manual provided with your product. Professional installation is recommended if you are unsure about any steps.

3. Əməliyyat və İstifadə

The Puig City Touring windscreen is designed to enhance your riding experience by providing improved aerodynamic protection. Once installed, it functions passively to deflect wind, rain, and road debris, contributing to rider comfort and safety.

3.1. Benefits During Use

  • Küləkdən qorunma: Reduces wind blast on the rider's chest and head, decreasing fatigue on longer rides.
  • Havadan Mühafizə: Offers a barrier against rain and cold, improving comfort in adverse weather.
  • Dağıntı Qalxanı: Protects the rider from small road debris and insects.
  • Aerodynamic Stability: The design helps maintain vehicle stability by managing airflow effectively.
Yan view of a scooter with the Puig City Touring Windscreen installed, highlighting its protective profile

Image 3.1: A scooter equipped with the Puig City Touring Windscreen, demonstrating its protective coverage from a side perspective.

4. Baxım

Proper maintenance will ensure the longevity and clarity of your Puig City Touring windscreen.

4.1. Təmizlik Təlimatları

  1. Durulayın: Gently rinse the windscreen with lukewarm water to remove loose dirt and dust. Avoid using high-pressure washers directly on the screen.
  2. Yuma: Use a soft cloth or sponge and a mild soap solution (e.g., dish soap diluted in water). Gently wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate.
  3. Hərtərəfli yuyun: Rinse again with clean water to remove all soap residue.
  4. Quru: Dry the windscreen with a clean, soft microfiber cloth to prevent water spots. Do not wipe a dry, dirty screen, as this can cause scratches.

4.2. Yoxlama

Regularly inspect the windscreen and its mounting hardware for any signs of damage, cracks, or loose fasteners. Tighten any loose bolts as necessary. Replace the windscreen if it becomes severely scratched or damaged, as this can impair visibility and safety.

5. Giderme

This section addresses common issues you might encounter with your windscreen.

ProblemMümkün SəbəbHəll
Windscreen vibrates or rattlesLoose mounting fasteners.Check and tighten all mounting bolts and screws. Ensure all components are properly seated.
Cızıqlara görə görmə qabiliyyətinin azalmasıImproper cleaning methods or impact damage.Minor scratches may be polished with specialized polycarbonate polish. For severe scratches, replacement of the windscreen is recommended. Always use soft cloths and mild soap for cleaning.
Windscreen does not fit correctlyIncorrect model purchased or improper installation.Verify that the windscreen model (21112H) is compatible with your scooter model and year. Re-check installation steps, ensuring brackets are correctly positioned. Contact Puig support if issues persist.

6. Məhsulun Spesifikasiyası

  • Brend: puig
  • Model: Şəhər turu
  • Model nömrəsi: 21112H
  • İstehsalçı Hissə nömrəsi: 21112H
  • İstehsalçı: Motoplastic, S.A.
  • Material: 3mm High-Resistance Polycarbonate
  • Rəng / Bitirmə: Siqaretli
  • Vəzifə: Üst Cəbhə
  • Maddə çəkisi: 1.57 kiloqram
  • Paket Ölçüləri: 57.8 x 45.7 x 12.1 sm
  • Avtomobil Uyğunluq Növü: Avtomobilin Xüsusi Uyğunluğu
  • Sertifikatlar: TÜV approved, ABE licensed
Ətraflı tərəf view of the Puig City Touring Windscreen, showcasing its aerodynamic profile and smoked finish

Şəkil 6.1: Side profile of the Puig City Touring Windscreen, illustrating its design and material thickness.

7. Zəmanət və Dəstək

Information regarding warranty coverage for Puig products is typically provided with the purchase documentation or can be found on the official Puig website. For specific warranty details, please refer to the terms and conditions provided at the time of purchase.

7.1. Müştəri dəstəyi

For technical assistance, installation queries, or any other support needs, please contact Puig customer service through their official website or authorized dealers. When contacting support, please have your product model number (21112H) and purchase details readily available.

You can visit the official Puig store for more information: Puig Store on Amazon.fr

Əlaqədar Sənədlər - 21112H

Preview Puig V-Tech Touring Windscreen Mounting Instructions for Yamaha NMAX 125 (2021-)
Detailed mounting instructions for the Puig V-Tech Touring windscreen on the Yamaha NMAX 125 (2021 model year and onwards). Includes parts list and step-by-step assembly guide.
Preview Piaggio Vespa GTS 125/300 '07- üçün Puig GTS Touring Qabaq Şüşəsinin Montaj Təlimatları
Xüsusi olaraq 2007-ci ildən etibarən Piaggio Vespa GTS 125 və GTS 300 modelləri üçün hazırlanmış Puig GTS Touring ön şüşəsi üçün ətraflı montaj təlimatları və hissələrin siyahısı. Bu təlimatda sökülmə, mötərizə yığımı, ön şüşənin bərkidilməsi və son bərkitmə addımları, o cümlədən tələb olunan avadanlıq və fırlanma momenti xüsusiyyətləri ətraflı şəkildə təsvir edilmişdir.
Preview Piaggio Vespa GTS 125/300 '07- üçün Puig GTS Touring Qabaq Şüşəsinin Montaj Təlimatları
2007-ci ildən etibarən Piaggio Vespa GTS 125/300 modelləri üçün nəzərdə tutulmuş Puig GTS Touring Windshield üçün ətraflı montaj təlimatları. Hissə siyahıları, təsvirlər və montaj addımları daxildir.
Preview BMW G310GS '17 üçün Puig Touring Screen - Montaj Təlimatları
BMW G310GS motosikleti (2017-ci ildən sonrakı) üçün hazırlanmış Puig Touring Screen üçün rəsmi montaj təlimatları və hissələrin siyahısı. Addım-addım yığma təlimatını ehtiva edir.
Preview Puig Touring Screen Mounting Instructions for BMW F900GS '24- (REF 21980)
Detailed mounting instructions and parts list for the Puig Touring Screen (REF 21980) designed for the BMW F900GS '24- model. Includes assembly steps and component references.
Preview Triumph Bonneville Speedmaster '18- üçün Puig Batwing SML Semifairing Montaj Təlimatları
Triumph Bonneville Speedmaster 2018 üçün Puig Batwing SML Semifairing Touring Modeli (REF 21117) üçün ətraflı montaj təlimatları və hissələrin siyahısı. Addım-addım diaqramlar və fırlanma momenti xüsusiyyətləri daxildir.