1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your Srliya Smart Thermostat. This device is designed for precise temperature control in underfloor heating systems or steam rooms, offering a color display and intuitive knob control for user convenience.
Şəkil 1: Ön view of the Srliya Smart Thermostat.
2. Təhlükəsizlik Məlumatı
Please read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Quraşdırma yerli elektrik qaydalarına uyğun olaraq ixtisaslı elektrikçi tərəfindən aparılmalıdır.
- Termostatı quraşdırmazdan və ya xidmət göstərməzdən əvvəl həmişə elektrik açarını ayırın.
- Do not install the thermostat in areas with excessive moisture or direct water exposure.
- Bütün naqillərin etibarlı və düzgün izolyasiya edildiyinə əmin olun.
- Bu cihaz yalnız daxili istifadə üçün nəzərdə tutulub.
3. Paketin məzmunu
Bütün əşyaların paketdə olduğunu yoxlayın:
- 1 x Srliya Smart Thermostat
- 2 x Montaj vintləri
- 1 x Təlimat kitabçası (bu sənəd)
Figure 2: Thermostat and included screws.
4. Quraşdırma və Quraşdırma
4.1 Quraşdırma yeri
Install the thermostat in a location that accurately reflects the room temperature, away from direct sunlight, drafts, or heat sources. The thermostat is designed for universal cassette installation, fitting both 86x86mm square boxes or European 60mm round boxes.
4.2 Naqillərin çəkilməsi üzrə təlimatlar
WARNING: Disconnect power at the circuit breaker before proceeding with wiring.
- Carefully remove the front panel of the thermostat to access the wiring terminals.
- Connect the power supply wires (95-240V AC, 50-60Hz or 24V DC/AC, 50-60Hz) to the designated terminals.
- Connect the heating system wires (e.g., underfloor heating cables or boiler control wires) to the appropriate load terminals. The thermostat supports a current load of 5A for water heating/gas boilers or 16A for electric heating.
- Connect the NTC3950, 10k sensor to its dedicated terminals. This sensor measures the floor or room temperature.
- Ensure all wires are securely fastened. The terminals are designed for wire sizes 2x1.5mm² or 1x2.5mm².
- Mount the thermostat base into the wall box using the provided screws.
- Reattach the front panel to the thermostat base.
Figure 3: Thermostat showing installation depth.
4.3 İlkin işə salınma
After installation, restore power at the circuit breaker. The thermostat's color display should illuminate, indicating it is ready for operation.
5. Əməliyyat Təlimatları
The Srliya Smart Thermostat features a liquid crystal color display and a capacitive touch knob for easy operation.
5.1 Üzərində göstərinview
The color display clearly shows the current room temperature, the set temperature, operating mode, and other relevant information. The display is designed for easy readability.
Figure 4: Close-up of the control knob and display.
5.2 Temperaturun qurulması
İstədiyiniz temperaturu tənzimləmək üçün:
- Rotate the central knob clockwise to increase the set temperature.
- Rotate the central knob counter-clockwise to decrease the set temperature.
- The display will show the new set temperature, and the system will adjust heating to reach this target.
5.3 Mode Selection (If Applicable)
Refer to the on-screen prompts or specific icons near the knob for advanced mode selections, such as programming schedules or switching between manual and automatic modes. Typically, a short press on the knob or a specific touch area activates mode selection, followed by knob rotation to navigate and another press to confirm.
6. Baxım
6.1 Təmizləmə
To clean the thermostat, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing. Ensure the thermostat is powered off before cleaning.
6.2 Ümumi qulluq
Avoid exposing the thermostat to extreme temperatures, direct sunlight for prolonged periods, or excessive humidity. Do not attempt to disassemble the unit beyond what is described in the installation instructions.
7. Giderme
Termostatınızla bağlı problemlərlə qarşılaşsanız, aşağıdakı ümumi problemlərə və həllərə baxın:
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Termostat ekranı boşdur. | Enerji təchizatı yoxdur. | Check circuit breaker and wiring connections. Ensure power is restored. |
| İstilik sistemi cavab vermir. | Incorrect wiring; thermostat in wrong mode; heating system fault. | Verify wiring connections. Check thermostat operating mode. Consult a heating technician if the heating system itself is faulty. |
| Yanlış temperatur oxunması. | Sensor issue; thermostat location. | Ensure the NTC sensor is properly connected. Relocate the thermostat if it's in a drafty or hot spot. |
| Parametrləri dəyişdirmək mümkün deyil. | Thermostat locked or in a specific program mode. | Refer to the operating instructions for unlocking or changing modes. |
8. Spesifikasiyalar
Detailed technical specifications for the Srliya Smart Thermostat:
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Model nömrəsi | Srliyadu9so3zbwy-11 |
| Cildtage | 95-240V AC, 50-60Hz or 24V DC/AC, 50-60Hz |
| Sensor | NTC3950, 10k |
| Otaq Temperatur Aralığı | 5-70°C |
| Temperatur Aralığını təyin edin | 5-35°C |
| Ekran Temperatur Aralığı | 5-70°C |
| Ətraf mühitin temperaturu | 0 ilə 45 ° C arasında |
| Mühit Rütubəti | 5-95% RH (Yoğuşmayan) |
| Saxlama temperaturu | -5°C ilə 45°C arasında |
| Enerji istehlakı | <1.5W |
| Qoruma səviyyəsi | IP20 |
| Düymə növü | Kapasitiv toxunma |
| Cari Yük | 5A (Water Heating, Water Gas Boiler) / 16A (Electric Heating) |
| Quraşdırma qutusu | 86x86mm Square Box or European 60mm Round Box |
| Terminal telinin ölçüsü | 2x1.5mm² or 1x2.5mm² |
| Maddə Çəkisi | 7.5 unsiya (təxminən 212 q) |
| Ölçülər (Paket) | 4.72 x 3.94 x 2.76 düym |
| Thickness (Thermostat) | 12.4mm (thin profile) |
Şəkil 5: Yan view illustrating the thermostat's thin design.
9. Zəmanət və Dəstək
For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support or further assistance, please reach out to the manufacturer or your point of purchase.
