OWON HDS241 Single-Channel Handheld Oscilloscope Instruction Manual

1. Giriş

The OWON HDS241 is a versatile 3-in-1 handheld device that integrates a single-channel oscilloscope, a 24,000-count digital multimeter, and a 100KHz signal generator. Designed for portability and efficiency, it is suitable for various electrical testing and measurement applications. This manual provides detailed instructions for safe and effective use of your device.

Təhlükəsizlik tədbirləri: Always observe general safety rules when operating electrical equipment. Ensure proper connections and use appropriate probes for the measurement task. Do not exceed the maximum input ratings of the device.

2. Məhsul bitdiview

The HDS241 combines three essential functions into one compact unit:

• Osiloskop: Features a 40 MHz bandwidth, 250 MSa/s real-time sampling rate, and a waveform refresh rate of up to 10,000 wfms/s. It supports auto-setup, multiple measurement functions, cursor measurement, and a slow sweep mode for long-term signal monitoring.
• Rəqəmsal multimetr: A 4½-digit True RMS multimeter with 24,000 counts. It can measure AC/DC voltage, AC/DC current, resistance, diode, capacitance, and perform continuity tests. Maximum input voltage is AC 750V and DC 1000V.
• Siqnal generatoru: A single-channel generator with a frequency range of up to 100 kHz. It supports sine, square, ramp, and pulse waveform outputs with a maximum amplitude of 2.5 Vpp.

The device features a 3.5-inch high-definition color LCD screen for clear display of waveforms and measurement data. Its robust design includes a rubber coating for durability and improved grip.

Şəkil 2.1: The OWON HDS241 device, showcasing its 3-in-1 functionality as an oscilloscope, multimeter, and signal generator. Key specifications for each mode are listed alongside the device.

Şəkil 2.2: A comprehensive diagram illustrating the various buttons, ports, and display areas of the OWON HDS241, including the viewing area, multi-function keys, channel key, mode change key, system configuration, save button, power button, multimeter input port, horizontal adjustment, measurement range switch, arrow keys, auto range key, hold/run key, signal input connector, probe compensation output, and USB charge/communication interface.

3. Quraşdırma

3.1 Batareyanın quraşdırılması və doldurulması

The HDS241 is powered by a high-capacity 2000 mAh lithium battery. The device features a low-power consumption design for extended operation.

• Doldurulur: Connect the device to a power source using the standard USB Type-C port. You can use a compatible adapter or a power bank.
• Batareyanın ömrü: The battery provides long-lasting performance. Actual usage time may vary based on operating conditions.

Şəkil 3.1: This image shows the internal battery compartment of the OWON HDS241, revealing two 18650 lithium batteries, and highlights the USB Type-C port for charging and PC connection.

3.2 Zondların birləşdirilməsi

For oscilloscope measurements, connect the probe to the BNC connector. For multimeter functions, use the provided test leads with the multimeter input ports.

• BNC Konnektoru: The BNC connector features an external rubber coating to enhance safety and prevent external interference. It supports high-voltage probes for accurate and reliable signal capture.

Şəkil 3.2: This image highlights the BNC connector with external rubber coating for safety and interference prevention. It also illustrates the difference between conventional measurement (accurate only for sine waves) and True RMS measurement (accurately measures all current waveforms).

3.3 Yandırma/Söndürmə

Press and hold the power button (refer to Figure 2.2 for location) to turn the device on or off.

4. Əməliyyat Təlimatları

4.1 Osiloskop Rejimi

To enter Oscilloscope mode, press the 'Mode' button until the oscilloscope interface is displayed.

• Basic Waveform Display: Connect the probe to the signal source. The waveform will be displayed on the screen.
• Avtomatik quraşdırma: Press the 'Auto' button for automatic adjustment of vertical, horizontal, and trigger settings to quickly display a stable waveform.
• Ölçmə funksiyaları: The HDS241 offers various measurement capabilities:
  • Avtomatik Ölçmələr: Includes Period, Frequency, Mean, PK-PK, Max, Min, Amplitude, and RMS.
  • Kursorun ölçülməsi: Use the cursor function to measure voltage difference (ΔV) and time difference (ΔT) between two points on the waveform.
• Məlumata qənaət: Connect the device to a computer via the USB Type-C port. The included PC software allows you to save waveform images and data for further analysis.

Şəkil 4.1: This image details the oscilloscope's advanced features, including Dual Sampling Mode for interference detection, High Refresh Rate (10,000 wfms/s) and Deep Storage (8K record length), 8 Types of AutoMeasurements (Frequency, Period, Amplitude, Max, Min, Mean, PK-PK, RMS), and Cursor Measurement for ΔV and ΔT. It also shows the Save Function for reference waveforms.

Şəkil 4.2: This image displays four examples of waveforms captured by the OWON HDS241: a Mains Waveform with peak highlighted, a TV Signal Wave, a PLC Pulse Wave, and a Multi-Audio Frequency Response Signal, demonstrating its versatility in signal analysis.

Şəkil 4.3: The OWON HDS241 is shown connected to a laptop via a USB cable, demonstrating its capability to save waveform images and data for further analysis on a computer.

4.2 Multimetr Rejimi

To enter Multimeter mode, press the 'Mode' button until the multimeter interface is displayed.

• Ölçmələr: The multimeter supports measuring AC/DC voltage, AC/DC current, resistance, diode, capacitance, and continuity. Select the desired measurement function using the appropriate buttons.
• Əsl RMS: The HDS241 features True RMS measurement, which is essential for accurately measuring non-sinusoidal AC waveforms.
• Avtomatik diapazon: The device automatically selects the appropriate measurement range for convenience.

Şəkil 4.4: The OWON HDS241 is depicted in an outdoor setting, connected to a car battery with multimeter probes, illustrating its practical application for electrical measurements.

4.3 Siqnal Generatoru Rejimi

To enter Signal Generator mode, press the 'Mode' button until the signal generator interface is displayed.

• Dalğa Formasının Seçimi: Choose from sine, square, ramp, or pulse waveforms.
• Tezlik və Ampuzunluq: Adjust the output frequency (up to 100 kHz) and amplitude (up to 2.5 Vpp) as required for your testing needs.

5. Baxım

• Təmizləmə: Cihazı təmizləmək üçün yumşaq, quru parça istifadə edin. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
• Batareyaya qulluq: Batareyanın ömrünü uzatmaq üçün batareyanı tez-tez tam boşaltmaqdan çəkinin. Cihazı müntəzəm olaraq doldurun, xüsusən də uzun müddət saxlanılacaqsa.
• Yaddaş: Cihazı birbaşa günəş işığından və həddindən artıq temperaturdan uzaq sərin, quru yerdə saxlayın.

6. Giderme

If you encounter issues with your OWON HDS241, consider the following basic troubleshooting steps:

• Cihaz açılmır: Ensure the battery is charged. Connect the device to a power source using the USB Type-C cable and try again.
• No waveform displayed: Check that the probe is correctly connected to both the device and the signal source. Verify the signal source is active. Try using the 'Auto' button to adjust settings.
• Yanlış multimetr oxunuşları: Ensure the test leads are properly inserted into the correct input jacks for the measurement type (e.g., voltage, current, resistance). Check the integrity of the test leads.
• Unstable readings: Ensure connections are secure and there is no external interference.

For further assistance, please contact OWON customer support.

7. Spesifikasiyalar

Şəkil 7.1: This image presents a detailed table of technical specifications for the OWON HDS241, covering its oscilloscope, digital multimeter, and waveform generator functions.

7.1 Osiloskop Xüsusiyyətləri

7.2 Digital Multimeter Specifications

7.3 Waveform Generator Specifications

7.4 Ümumi xüsusiyyətlər

• Ölçülər: 9.6 x 3.8 x 19.8 sm
• Çəki: 1.2 kq
• Batareya: 2000 mAh Litium Batareya
• Doldurma interfeysi: USB Type-C

8. Zəmanət və Dəstək

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact OWON customer service directly. Keep your purchase receipt as proof of purchase.