RAB Lighting B17 LED Bollard Light Instruction Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Əsas xüsusiyyətlərə aşağıdakılar daxildir:

• Energy-efficient LED with a 50,000-hour lifespan.
• Tənzimlənən vattage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• UL yaş yerlər üçün siyahıya alınmışdır.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Təhlükəsizlik Məlumatı

XƏBƏRDARLIQ: Elektrik şoku riski. Quraşdırmadan və ya xidmət göstərməzdən əvvəl elektrik enerjisini ayırın. Quraşdırma bütün tətbiq olunan milli və yerli elektrik qaydalarına uyğun olaraq ixtisaslı elektrikçi tərəfindən aparılmalıdır.

• Təchizat həcmini təmin edintage is correct for the fixture.
• Do not handle live components.
• Müvafiq fərdi qoruyucu vasitələrdən (PPE) istifadə edin.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Do not modify the fixture. Any modifications may void the warranty and create safety hazards.

3. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Təlimat kitabçası (bu sənəd)

4. Quraşdırma və Quraşdırma

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Quraşdırma saytını hazırlayın: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Gücü ayırın: Hər hansı bir elektrik işinə başlamazdan əvvəl elektrik açarını söndürün.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Elektrik bağlantılarını qurun: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Bütün bağlantıların etibarlı və izolyasiya edilmiş olduğundan əmin olun.
5. Wat seçintage və CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Gücü bərpa edin: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Əməliyyat Təlimatları

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24 Vt: Maksimum parlaqlıq.
• 19 Vt: Medium brightness, reduced energy use.
• 14 Vt: Lower brightness, maximum energy savings.

Tənzimləmək üçün: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Tənzimləmək üçün: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Baxım

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Təmizləmə: Armaturun xarici hissəsini vaxtaşırı yumşaq bir vasitə ilə təmizləyin, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Yoxlama: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED dəyişdirilməsi: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Giderme

8. Spesifikasiyalar

9. Zəmanət və Dəstək

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webxüsusi zəmanət şərtləri və əlaqə məlumatları üçün sayt və ya satınalma sənədləriniz.

RAB Lighting Contact: www.rablighting.com