1. Giriş
This manual provides essential information for the safe and effective operation, installation, and maintenance of your TOPWAY 110V AC Gasoline Fuel Pump. This self-priming oil transfer pump is designed for transferring gasoline, fuel, light oils, diesel, and kerosene. Please read this manual thoroughly before use to ensure proper function and to prevent injury or damage.
2. Təhlükəsizlik Məlumatı
Sizin və başqalarının təhlükəsizliyi hər şeydən vacibdir. Aşağıdakı təhlükəsizlik tədbirlərinə həmişə əməl edin:
- Bütün Təlimatları Oxuyun: Before operating the pump, read and understand all instructions and warnings in this manual.
- Yanan mayelər: This pump is designed for flammable liquids. Always operate in a well-ventilated area, away from ignition sources, open flames, sparks, or excessive heat.
- No Smoking: Do not smoke while operating or near the pump.
- Torpaqlama: Ensure the pump and all associated equipment are properly grounded to prevent static electricity discharge, which can ignite flammable vapors.
- Həddindən artıq istidən qorunma: The pump is equipped with overheat protection. If the pump overheats, it will automatically shut off. Allow it to cool down before resuming operation.
- Partlayışa davamlı dizayn: The pump incorporates explosion-proof components and technology. However, always exercise extreme caution when handling flammable materials.
- Fərdi Qoruyucu Avadanlıqlar (PPE): Wear appropriate PPE, including safety glasses and chemical-resistant gloves, when handling fuels.
- Not for Water: This pump is specifically designed for fuels and light oils. Do not use it to pump water or corrosive liquids, as this can damage the pump and void the warranty.
- Elektrik Təhlükəsizliyi: Enerji təchizatının nasosun həcminə uyğun olduğundan əmin oluntage (110V AC). Do not operate with damaged cords or plugs.
3. Paketin məzmunu
Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact TOPWAY customer support.
- 1 x TOPWAY 110V AC Gasoline Fuel Transfer Pump
- 2 x Hose Adaptors
- 2 x Klipləri
- 1 x Plastic Oil Filter
- 1 x Möhürləyici lent

Image 1: The TOPWAY 110V AC Gasoline Fuel Pump shown with its included accessories: hose adaptors, clips, plastic oil filter, and sealing tape.
4. Məhsulun xüsusiyyətləri
The TOPWAY 110V AC Gasoline Fuel Pump is engineered with several features for reliable and safe fuel transfer:
- Güclü Performans: Capable of transferring fuel at a rate of up to 10 Gallons Per Minute (GPM).
- Öz-özünə işləmə: Designed to self-prime, simplifying the setup process. Maximum suction lift is 6.5 ft.
- Həddindən artıq istidən qorunma: Built-in thermal protection prevents the motor from overheating during extended operation.
- Explosion-Proof: Features professional explosion-proof components and technology for enhanced safety when handling flammable liquids.
- Davamlı tikinti: Made from premium Cast Iron and Stainless Steel (SS) material, ensuring sturdiness and corrosion resistance.
- Təmiz Mis Motor: Equipped with a high-efficiency, low-noise pure copper motor for long-lasting performance.
- Portativ dizayn: Includes a solid built-in handle for easy carrying and transport.
- Stabil baza: Features a stable built-in base for direct fixation to various surfaces.
- Daxili Keçid: Allows for continuous operation without damaging the pump if the nozzle is closed.

Şəkil 2: Ətraflı view highlighting key design elements such as the thick metal handle, 100% copper motor, explosion-proof switch, and robust cast iron body, along with a visual representation of included accessories.

Image 3: Illustration demonstrating the self-priming capability of the pump, indicating maximum lift of 33ft and maximum suction of 6.5ft. Also shows icons for compatible liquids: gasoline, fuel, vegetable oil, and kerosene.
5. Spesifikasiyalar
| Spesifikasiya | Dəyər |
|---|---|
| Model nömrəsi | TOP07071-1 |
| Güc mənbəyi | Kabelli Elektrik (110V AC) |
| Güc | 1 / 4 HP |
| Maksimum axın sürəti | Dəqiqədə 10 Qalon (GPM) |
| Maksimum Emiş Lift | 6.5 fut |
| Maksimum Lift | 33 fut |
| Giriş/Çıxış Portu | NPT 3/4" |
| Hose Adaptor Diameter | Φ19 mm |
| Uyğun mayelər | Gasoline, Diesel, Light Oil, Kerosene (Not for water) |
| Material | Çuqun, Paslanmayan Polad |
| Maddə Çəkisi | 10 funt sterlinq |
| Elektrik Şnurunun Uzunluğu | 11 fut |

Image 4: A visual representation of the pump's specifications, including physical dimensions (7.6 inches length, 5.2 inches height), power cord length, and performance metrics like power, voltage, max flow, max lift, and max suction.
6. Quraşdırma
Follow these steps for initial setup of your fuel pump:
- Paketdən çıxarın: Bütün komponentləri qablaşdırmadan çıxarın.
- Yoxlayın: Check the pump and all accessories for any signs of damage. Do not use if damaged.
- Attach Hose Adaptors: Securely attach the two hose adaptors to the inlet and outlet ports of the pump. Use the provided sealing tape on the threads to ensure a leak-proof connection.
- Filtri quraşdırın: Connect the plastic oil filter to the inlet hose adaptor. This filter helps prevent debris from entering the pump.
- Secure Hoses: Attach your fuel hoses (not included) to the hose adaptors using the provided clips to ensure a tight and secure connection.
- Yerləşdirmə: Place the pump on a stable, level surface. The built-in base allows for direct fixation if desired. Ensure the pump is positioned in a well-ventilated area, away from any ignition sources.
- Enerji bağlantısı: Connect the pump's power cord to a grounded 110V AC electrical outlet. Ensure the outlet is suitable for outdoor use if operating outdoors.
7. Əməliyyat Təlimatları
Once set up, follow these steps to operate your TOPWAY fuel pump:
- Hazırlayın: Ensure the inlet hose is fully submerged in the fuel source and the outlet hose is directed into the receiving container.
- Güc Aktivdir: Flip the explosion-proof switch to the 'ON' position. The pump will begin to operate.
- Nəzarət axını: The pump is self-priming. Allow a few moments for the pump to prime and begin transferring fuel. Monitor the flow rate and ensure there are no leaks.
- Transfer Fuel: Continue pumping until the desired amount of fuel has been transferred or the source tank is empty.
- Söndürmək: Once transfer is complete, flip the switch to the 'OFF' position.
- Bağlantını kəsin: Carefully disconnect the hoses, ensuring any residual fuel is contained.
Uyğun mayelər
This pump is compatible with:
- Benzin
- Dizel
- Light Oils
- kerosin
ƏHƏMİYYƏTLİ: Do not use this pump for water, corrosive chemicals, or highly viscous liquids. Using incompatible liquids can damage the pump and pose safety risks.
8. Baxım
Regular maintenance ensures the longevity and optimal performance of your pump:
- Təmizləmə: After each use, especially when transferring different types of fuel, flush the pump with a small amount of the new fuel or a compatible cleaning agent to prevent contamination and residue buildup. Wipe down the exterior with a clean cloth.
- Filtr Təftişi: Regularly inspect the plastic oil filter for clogs or damage. Clean or replace the filter as needed to maintain optimal flow and protect the pump.
- Hose and Connection Check: Periodically inspect hoses, adaptors, and clips for wear, cracks, or leaks. Replace any damaged components immediately.
- Yaddaş: When not in use, store the pump in a clean, dry, and well-ventilated area, away from direct sunlight, extreme temperatures, and ignition sources. Ensure all fuel is drained from the pump and hoses before storage.
- Elektrik Şnuru: Check the power cord and plug for any damage before each use. Do not use if frayed or damaged.
9. Giderme
If you encounter issues with your pump, refer to the following table for common problems and solutions:
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pompa işə düşmür | Enerji təchizatı yoxdur Zədələnmiş elektrik kabeli/şifti Həddindən artıq istidən qorunma aktivləşdirildi | Elektrik bağlantısı və çıxışı yoxlayın Inspect cord/plug; replace if damaged Allow pump to cool down (approx. 30 mins) |
| Aşağı axın sürəti və ya axın olmaması | Tıxanmış filtr Air leak in inlet hose/connections Inlet hose not fully submerged Pump not primed (though self-priming, can happen) Excessive lift/suction height | Filtri təmizləyin və ya dəyişdirin Bütün əlaqələri sıxlıq üçün yoxlayın Ensure inlet hose is fully in liquid Ensure sufficient liquid in source tank Reduce lift/suction height within specifications |
| Nasos səs-küylüdür | Sistemdə hava Pompa quru işləyir Pompada zibil | Check for air leaks in inlet line Ensure continuous fuel supply Disconnect power, inspect and clear debris (if safe) |
| Yanacaq sızması | Boş əlaqələr Damaged hoses/seals | Tighten all hose adaptors and clips Inspect and replace damaged hoses or seals |
If the problem persists after attempting these solutions, please contact TOPWAY customer support.
10. Proqramlar
The TOPWAY 110V AC Gasoline Fuel Pump is versatile and suitable for a wide range of fuel transfer applications, including but not limited to:
- Vehicles (cars, trucks, motorcycles)
- Caravans and RVs
- Boats and marine vessels
- Agricultural machinery (tractors, harvesters)
- Tikinti avadanlığı
- Filling or emptying diesel/oil/gasoline storage tanks

Şəkil 5: Məsamples of wide applications for the fuel pump, including recreational vehicles (RVs), agricultural harvesters, Jeeps, and transferring fuel from oil barrels.
11. Zəmanət və Dəstək
Zəmanət: This TOPWAY fuel pump comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, accident, unauthorized repair, or use with incompatible liquids.
Müştəri Dəstəyi: For any questions, technical assistance, warranty claims, or troubleshooting beyond what is covered in this manual, please contact TOPWAY customer support. Refer to your purchase documentation or the seller's information for specific contact details. Please have your model number (TOP07071-1) and purchase date ready when contacting support.





