TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer

1. Giriş

The TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73) is designed for precise temperature monitoring in refrigerators, freezers, water baths, heating blocks, and incubators. This device simultaneously displays current, minimum, and maximum temperatures, offering a comprehensive overview of environmental conditions. Its built-in memory stores temperature data, and programmable alarms provide alerts for critical temperature deviations.

Əsas Xüsusiyyətlər:

• Simultaneous display of current, minimum, and maximum temperatures.
• Built-in memory for tracking temperature conditions over time.
• Precise high and low temperature alarms, adjustable in 1° increments.
• Submersible temperature probe with a 10-ft (3-m) micro-cable.
• Multiple mounting options: hook-and-loop strips, wall-mount slots, or flip-open stand.
• NIST-traceable calibration certificate included.

2. Paketin məzmunu

Verify that all items listed below are present and in good condition:

• TRACEABLE Jumbo Calibrated Digital Fridge/Freezer Thermometer (Model AO-94460-73)
• 1 5-mL Bottle Probe (submersible)
• Məlumatları olan NIST izlənilə bilən kalibrləmə sertifikatı
• Hook-and-loop strips for mounting
• Magnetic strips for mounting
• Bir AAA qələvi batareya

3. Quraşdırma

3.1. Batareyanın quraşdırılması

1. Cihazın arxasındakı batareya bölməsini tapın.
2. Batareya bölməsinin qapağını çıxarın.
3. Insert the supplied AAA alkaline battery, ensuring correct polarity (+/-).
4. Batareya bölməsinin qapağını etibarlı şəkildə dəyişdirin.

3.2. Probe Placement

The bottle probe is designed to buffer rapid temperature changes, providing a more stable and accurate reading of the stored contents. The 10-ft (3-m) micro-cable allows the probe to be placed inside the monitored environment while the main unit remains outside.

• Place the bottle probe inside the refrigerator, freezer, or other environment where temperature monitoring is required. Ensure the probe is positioned to accurately reflect the temperature of the items being stored.
• The micro-cable is thin enough to allow refrigerator or freezer doors to close without damaging the cable or compromising the seal.

Image: A person placing a bottle probe inside a refrigerator, demonstrating proper probe placement.

3.3. Əsas Blokun Quraşdırılması

The main thermometer unit can be mounted in several ways:

• Hook-and-Loop Strips: Attach the adhesive-backed hook-and-loop strips to the back of the unit and a clean, flat surface (e.g., side of a refrigerator, wall).
• Magnetic Strips: Use the magnetic strips for attachment to metallic surfaces.
• Wall-Mount Slots: Utilize the integrated slots on the back of the unit to hang it on screws or hooks.
• Flip-Open Stand: For benchtop use, extend the integrated stand on the back of the unit.

Image: A hand pressing a button on the TRACEABLE thermometer, which is mounted on the exterior of a refrigerator.

4. Əməliyyat Təlimatları

4.1. Gücü yandırın/söndürün

The unit powers on automatically upon battery installation. There is no dedicated power button. To turn off, remove the battery.

4.2. Reading Temperatures

The large LCD display shows three temperature readings simultaneously:

• Cari Temperatur: The real-time temperature measured by the probe.
• Minimum Temperatur (MİN): Son sıfırlamadan bəri qeydə alınan ən aşağı temperatur.
• Maksimum Temperatur (MAX): Son sıfırlamadan bəri qeydə alınan ən yüksək temperatur.

4.3. Switching Temperature Units (°F/°C)

düyməsini basın °F/°C button (if available, or a similar labeled button) to toggle between Fahrenheit and Celsius temperature scales.

4.4. Viewing and Clearing Min/Max Memory

The thermometer automatically records the minimum and maximum temperatures reached since the last memory reset. These values are continuously displayed.

• To clear the MIN/MAX memory and begin a new recording cycle, press the TƏMİZLƏ button. The display will show the current temperature for MIN and MAX until new minimum and maximum values are recorded.

4.5. Siqnalların qurulması

The thermometer features programmable high and low temperature alarms. An alarm will sound when the temperature exceeds the high set point or falls below the low set point. The alarm continues to sound even if the temperature returns to the non-alarm range until acknowledged.

1. düyməsini basın SET siqnalizasiya rejiminə daxil olmaq üçün düymə.
2. istifadə edin UP və AŞAĞI arrow buttons to adjust the desired high temperature alarm limit.
3. basın SET again to confirm the high limit and proceed to set the low temperature alarm limit.
4. istifadə edin UP və AŞAĞI arrow buttons to adjust the desired low temperature alarm limit.
5. basın SET a third time to exit alarm setting mode and save the settings.
6. To enable or disable the alarm, press the Siqnal AÇ / KAPALI button. An alarm icon will typically appear on the display when the alarm is active.
7. To silence a sounding alarm, press any button. The alarm will reactivate if the temperature remains outside the set limits.

5. Baxım

5.1. Təmizləmə

Regular cleaning helps maintain the accuracy and longevity of your thermometer.

• Wipe the main unit and probe with a damp cloth. A mild soap solution can be used if necessary.
• Do not use abrasive cleaners or solvents, as these may damage the plastic casing və ya ekran.
• Ensure the main unit does not get wet, as it is not waterproof. The probe is submersible.

5.2. Batareyanın dəyişdirilməsi

When the display becomes dim or the unit stops functioning, it is time to replace the battery. Refer to Section 3.1 for battery installation instructions.

5.3. Probe Care

The bottle probe is designed for durability. Avoid sharp bends or kinks in the cable, which could damage the internal wiring. The probe is freezer safe and can remain in the monitored environment continuously.

6. Giderme

If your thermometer is not functioning as expected, please refer to the following common issues and solutions:

7. Spesifikasiyalar

8. Zəmanət

This TRACEABLE product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, alteration, or improper operation. If service is required during the warranty period, please contact customer support.

9. Müştəri dəstəyi

For technical assistance, warranty claims, or general inquiries, please contact TRACEABLE customer support. Refer to the contact information provided with your purchase documentation or visit the official TRACEABLE webən müasir dəstək təfərrüatları üçün sayt.

Onlayn Resurslar:

• ziyarət edin İzlənilə bilər websayt for product information, FAQs, and additional resources.