Phanteks Eclipse G400A ATX Mid-Tower Computer Case User Manual

Giriş

The Phanteks Eclipse G400A is a high-performance ATX Mid-Tower computer case designed for optimal airflow and component compatibility. Featuring a tempered glass side panel and pre-installed D-RGB fans, it offers both aesthetic appeal and efficient cooling. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Eclipse G400A case.

Figure 1: Phanteks Eclipse G400A ATX Mid-Tower Computer Case (White)

Quraşdırma Bələdçisi

1. Qabın açılması və yoxlanılması

Carefully remove the computer case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws, cable ties, and the user manual, are present.

2. Komponentin quraşdırılması

The Eclipse G400A is designed for easy installation of your PC components. Follow these general steps:

• Anakartın quraşdırılması: Install your ATX motherboard onto the pre-installed standoffs. Ensure proper alignment and secure it with screws. The case supports rear-side connector mainboards for a cleaner build.
• Enerji təchizatı blokunun (PSU) quraşdırılması: Install your PSU into the dedicated compartment at the bottom rear of the case. The case supports PSUs up to 270mm in length.
• Saxlama Diskinin quraşdırılması: The case supports 2x 2.5" SSDs and 2x 3.5" HDDs. Utilize the dedicated storage brackets and cable management tray for a clean setup.

Figure 2: Internal layout with highlighted storage and cable management areas

• Qrafik Kartın (GPU) Quraşdırılması: Install your graphics card into the appropriate PCIe slot. The case supports large GPU cards and includes triple mid-plate 120mm fan locations for direct GPU cooling.
• Radiator və ventilyatorun quraşdırılması: The case comes with 4x M25-140 Gen2 D-RGB fans pre-installed. It offers dedicated 360mm radiator support in the top without restrictions.

Figure 3: Top radiator support and pre-installed 140mm D-RGB fans

Figure 4: Dedicated 120mm fan positions for direct GPU cooling

3. Kabel idarəetməsi

Utilize the dedicated cable management tool and Velcro ties provided to route and secure cables behind the motherboard tray. This ensures optimal airflow and a clean interior.

Əməliyyat Təlimatları

1. Yandırılır

After connecting all internal components and external peripherals, connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel of the case to power on your system.

Figure 5: Front I/O Panel Layout

2. RGB İşıqlandırma Nəzarəti

The pre-installed M25-140 Gen2 D-RGB fans feature addressable RGB lighting. Control the lighting effects through your motherboard's RGB software (if compatible with D-RGB/ARGB) or a dedicated Phanteks RGB controller (sold separately).

Baxım

1. Təmizləmə

Mütəmadi təmizləmə optimal performansı qorumağa və komponentlərinizin ömrünü uzatmağa kömək edir.

• Toz Filtrləri: The Eclipse G400A features ultra-fine performance mesh panels on the top, left, and right sides, acting as dust filters. Regularly remove and clean these filters using compressed air or a soft brush to prevent dust buildup.
• Xarici: Xarici səthləri yumşaq bir parça ilə silin, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən çəkinin.

Figure 6: Removable front mesh panel and dust filter for easy cleaning

Figure 7: Disassembled panels demonstrating airflow and access for cleaning

2. Hava axınının optimallaşdırılması

Ensure cables are neatly managed to avoid obstructing airflow. Periodically check fan operation to ensure they are spinning freely and quietly.

Problemlərin aradan qaldırılması

• Sistem işə düşmür:
  • Check all power connections, including the PSU to wall outlet, PSU to motherboard (24-pin and CPU 8-pin), and front panel power switch header.
  • PSU açarının 'ON' vəziyyətində olduğundan əmin olun.
• Ventilyatorlar Fırlanmır / RGB Yanmır:
  • Verify fan and RGB cables are correctly connected to the motherboard headers or a dedicated RGB controller.
  • Ventilyator idarəetməsi və RGB parametrləri üçün anakart BIOS/UEFI parametrlərini yoxlayın.
• Poor Airflow / High Temperatures:
  • Clean all dust filters and fans.
  • Ensure proper cable management to avoid airflow obstruction.
  • Verify fan orientation (intake/exhaust) for optimal airflow path.

Texniki Spesifikasiyalar

Zəmanət və Dəstək

Phanteks products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Phanteks websaytına daxil olun və ya birbaşa müştəri xidmətləri ilə əlaqə saxlayın. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.

For further assistance, visit the official Phanteks support page: www.phanteks.com/support.html