Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Cihaz hissələri

1. Dinamik Başlığı
2. RGB İşıq
3. Al düyməsi
4. MIC
5. UART Başlığı
6. TF Kart Yuvası
7. Kamera
8. Köməkçi İşıq
9. Sıfırlama düyməsi
10. Natiq
11. Type-C Port
12. Güc işığı
13. Batareya işığı
14. BAT Header

Tez Bələdçi

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• Açarı sıfırlayın:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• Güc işığı:
  • The red LED is on steadily when powered.
• Batareya işığı:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Şəbəkə Qoşulması

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • Əgər webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • Qeyd: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • Qeyd: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Əsas Spesifikasiyalar

• Məhsulun adı: Al Camera Module
• Əsas Nəzarətçi ESP32-S3R8
• Ekran 1.83-inch TFT-LCD Touch Screen
• Piksellər 2 MP
• Simsiz WiFi & Bluetooth 5.0
• Flaş 16MB
• TF Kart Yuvası 128 GB-a qədər dəstəkləyir
• İnterfeys UART Interface. IC Pad
• Giriş 5V/1A
• Ölçülər 56.05*44.5*18.6mm
• İşləmə temperaturu -20°C ilə 65°C arasında

Sənədlər / Resurslar

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] İstifadəçi təlimatı ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

İstinadlar

• İstifadəçi təlimatı