Elektroblar-loqosu

Elektroblar ESP32-S3 İnkişaf Şurası

Electrobes-ESP32-S3-Development-Board-product

Spesifikasiyalar

  • Məhsulun adı: ESP32 İnkişaf Şurası
  • İstehsalçı: Espressif sistemləri
  • Uyğunluq: Arduino IDE
  • Simsiz əlaqə: WiFi

Təlimatlar

Download software and development board

  • Arduino IDE-də modullardan istifadə edirik (onları rəsmi proqramdan yükləmək olar website) https://www.arduino.cc/en/Main/Software. Using the development environment as an example to illustrate the usage of modules.
  • Arduino IDE proqramını açınElectrobes-ESP32-S3-Development-Board-fig1. The following interface appears。Electrobes-ESP32-S3-Development-Board-fig2

Add ESP32 development environment

  • ESP32 development environment add path
  • In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’).
  • Support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment
  • ildə webinkişaf şurası menecerinin saytı. "OK" düyməsini basın (yeni versiya "OK"-dir). Arduino IDE ana səhifəsinə qayıtmaq üçün yenidən "OK" düyməsini sıxın (yeni versiya "OK").Electrobes-ESP32-S3-Development-Board-fig3
  • İnkişaf Şurası Meneceri üzərinə klikləyin, İnkişaf Şurası Meneceri pəncərəsi görünür, ESP32-ni axtarın və inkişaf mühitini quraşdırınElectrobes-ESP32-S3-Development-Board-fig4Electrobes-ESP32-S3-Development-Board-fig5
  • Quraşdırılmış olanlar birbaşa istifadə edilə bilər. Silinmiş quraşdırmadan sonra inkişaf lövhəsində ESP32 modulları üçün çoxlu dəstəyin əlavə edildiyini görmək olar.Electrobes-ESP32-S3-Development-Board-fig7

Select the corresponding port and development board model

  • Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.Electrobes-ESP32-S3-Development-Board-fig8
  • Yüklə üzərinə klikləyin və yükləmənin tamamlanmasını gözləyin. Moduldakı RGB işıqları normal olaraq yanıb-sönəcək və WiFi bağlantısı qurulacaq.Electrobes-ESP32-S3-Development-Board-fig9Electrobes-ESP32-S3-Development-Board-fig10

Tez-tez verilən suallar

How do I know if the ESP32 module is successfully programmed?

Upon successful programming, the RGB lights on the module will flash normally, and a WiFi connection will be established.

Can I use other development environments with the ESP32 board?

The ESP32 board is specifically designed for use with Arduino IDE for optimal performance and compatibility.

Sənədlər / Resurslar

Elektroblar ESP32-S3 İnkişaf Şurası [pdf] İstifadəçi Təlimatı
ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 İnkişaf Şurası, ESP32-S3, İnkişaf Şurası, Lövhə

İstinadlar

Şərh buraxın

E-poçt ünvanınız dərc olunmayacaq. Tələb olunan sahələr qeyd olunub *