GRID BROWS LED Brows
BAŞLAMADAN ƏVVƏL
Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).
Qaşlar
Xüsusiyyətlər
- CFRP enclosures
- 2x 9 RGB LEDs
- RaceDirector compatible
Carbon fiber mounting brackets
Mounting the brows
To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). 
Bu keçmişdəample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.
Connecting the brows
As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box. 
Yarış Direktoru
- Download and install the lastest version of RaceDirector from www.sim-lab.eu/srd-setup
- For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
- Biz indi sizi tez bir zamanda yola salmaq üçün RaceDirector-dan istifadə etməyə başlamaq üçün əsasları nəzərdən keçirəcəyik. Biz həqiqətən sizi RaceDirector-un təklif etdiyi imkanların daha dərin izahı üçün təlimatı nəzərdən keçirməyə çağırırıq.
- Əvvəlcə məhsulu aktivləşdirməliyik, bu, "Parametrlər" (1) səhifəsində edilir.
- Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.
Cihaz səhifələri
These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.
LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. 
The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.
FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.
RaceDirector cari proqram təminatı versiyalarında nişanlar saxlayır. Bir fərq aşkar etdikdə, bir bildiriş 
daha yeni proqram təminatının aşkarlandığını sizə xəbər verəcəkdir. 
When an updated firmware version has been detected, please follow the instructions and click the ‘Perform update’ (1) button.
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.
Older devices might still require the former firmware update tool. In that case, RaceDirector will tell you what to do.
Simhub Dəstəyi
For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. 
LED-lərin funksiyalarının dəyişdirilməsi.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. 
Təqdim olunan standart LED proda kifayət qədər məlumat olmalıdırfiles LED parametrlərini istədiyiniz kimi tənzimləyə bilmək. Öz peşəkarınızı yaratmağa başlamaq üçünfile, mövcud olanı kopyalamağı və lazım olduqda dəyişdirməyi təklif edirik. Advantage, həmişə standart pro-nun ehtiyat nüsxəsinə sahibsinizfile geri düşmək.
Qeyd: Simhub pro ilə bağlı problemlər/nasazlıqların aradan qaldırılması üçünfiles, lütfən, Simhub sənədlərinə və ya Simhub dəstəyinə baxın.
Materiallar siyahısı
| Qutuda | |||
| # | Hissə | QTY | Qeyd |
| A1 | Qaş | 2 | |
| A2 | Nəzarət qutusu | 1 | Interface to PC. |
| A3 | Quraşdırma mili | 2 | |
| A4 | USB-A kabeli | 1 | |
| A5 | Brow cable long | 1 | Use between brows. |
| A6 | Brow cable short | 1 | |
| A7 | Bolt M5 X 14 DIN 7380 | 2 | |
| A8 | Bolt M5 X 8 DIN 7380 | 4 | |
| A9 | M5 yuvası | 4 | |
Ətraflı məlumat
Bu məhsulun yığılması və ya təlimatın özü ilə bağlı hələ də bəzi suallarınız varsa, dəstək şöbəmizə müraciət edin. Onlarla əlaqə saxlamaq olar: support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord
Sənədlər / Resurslar
 |
GRID BROWS LED Brows [pdf] Təlimat kitabçası VERSION 1.3, BROWS LED Brows, BROWS, LED Brows, Brows |