HANNA Instruments LogoSÜRƏTLİ İSTİFADƏ TƏLİMATÇI
HI520 Universal Process Controller
Çoxparametrli platforma

HI520 Universal Proses Nəzarətçisi Çox Parametrli Platforma

Hörmətli Müştəri,
Hanna Instruments-ı seçdiyiniz üçün təşəkkür edirik.
For more information about Hanna Instruments and our produce visit www.hannainst.com və ya bizə e-poçt göndərin sales@hannainst.com For technical support, contact your local Hanna Instruments of for e-mail us at tech@hannainst.com.

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Codehttp://manuals.hannainst.com/HI520

QR kodunu skan edin və ya istifadəçi təlimatını yükləmək üçün aşağıdakı linkdən istifadə edin. https://manuals.hannainst.com/HI520

Mövcud Modellər

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - HI520-0320 HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - HI520-0540
HI520-0320
3 relays & 2 analog outputs
HI520-0540
5 relays & 4 analog outputs

Paketin məzmunu

  • HI520
  • Cable gland seals (1 set)
  • Power cable, 3 m (9.84’) long
  • Tez istinad bələdçisi
  • Alət keyfiyyət sertifikatı

Qeyd: Bütün qablaşdırma materiallarına qənaət edin. Hər hansı zədələnmiş və ya qüsurlu məhsul, təchiz olunmuş aksessuarlarla birlikdə orijinal qablaşdırma materialında qaytarılmalıdır.

Əsas Xüsusiyyətlər

  • Hanna Instruments smart digital probes
  • Modbus RS-485 serial communication protocol
  • Independent / sequential channel control
  • Flexible function assignment for control, cleaning, Hold relays
  • Waterproof IP65 enclosure

Təhlükəsizlik tədbirləri

  • Electrical connection must be carried out by specialized personnel only. Read safety manual instructions before connecting to power.
  • Do not make electrical connections with device connected to power.
  • Do not run other cables through the designated power cable gland.
  • Have a disconnect switch installed in the vicinity of the instrument to ensure electrical circuit is de-energized for installation.

Enerjiyə qoşulur

  • Loosen the four screws, enough for the springs to push them out.
  • Grasp the front bezel and swing open to access the two-terminal power supply board.
  • Remove the safety cover to access Terminal 1 block (power path).
  • Remove the blank plug and thread the cable through the power cable gland.
  • Connect the power cable leads to the removable terminal connector marked POWER.
  • Follow L (live), PE (ground), N (neutral) lead markings for correct wiring of output leads.
  • Carefully put wired terminal connector into place on the board.
  • Replace safety cover over Terminal 1.

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - Power cable

Nəzarətçinin naqilləri

  • Yüksək cildtage əlaqələri: POWER, ALARM, REL 1 - REL 5 (relelər) Terminal 1 blokuna edilir.
  • Aşağı həcmtage əlaqələri: COMM (RS-485), PROBE1, IN1 və IN2 (rəqəmsal girişlər), A01 - A04 (analoq çıxışlar) və PROBE2 qaldırılmış Terminal 2 blokuna edilir.
  • Follow the positive/negative lead markings to ensure that output leads are wired to the correct position on the main board.

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - Controller WiringHANNA Instruments HI520 Universal Process Controller Multiparameter Platform - developing Hanna Instruments ətraf mühitə və iqlimə müsbət təsir göstərən rəqəmsal həllərin işlənib hazırlanmasına və tətbiqinə sadiqdir.
CE SİMBOLU All Hanna instruments conform to the CE European Directives, and our production facilities are ISO 9001 certified. HI520 is warranted for a period of t wo years against defects in workmanship and materials when used for its intended purpose and maintained according to instructions.

Please retain for future use. QR520 07/25

Zond naqilləri

  1. Nəzarətçinin gücə malik olmadığından əmin olun.
  2. Zond kabelini boru açılışından keçirin.
  3. Connect probe leads to the removable terminal connector marked PROBE1 or PROBE2.
    Follow the lead markings (positive / negative) for correct wiring.
  4. Diqqətlə naqilli terminal konnektorunu lövhədə yerinə qoyun.
  5. Position excess cable through the cable gland before tightening the nut.
  6. Remove the ground screw and hardware located below the PROBE1 or PROBE2 connector. Attach the ground lead (Yer). Probe cabling color code
Prob İşarələmə Qoşulmuş Kabel Patch Kabel Funksiya
pH, ORP, EC, DO YAŞIL QARA 0 V
B RS485 D –
A SARI MAVİ RS485 D+
+ QƏHVİ QIRMIZI 5 V
g YAŞIL-SARI YAŞIL-SARI MÜDAFİƏ EDİLMİŞ ZƏMƏK
Turbidity (TU) YAŞIL Qeyd: təmin etmək məftillər qaydalar var düzgün followed when controller unit is part of a larger industrial installation.
B
A SARI
+ QƏHVİ
g YAŞIL-SARI

Aksesuarlar

Installation accessories can be ordered from your local sales office.

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - AccessoriesScan the QR codes to download probes user manuals.

HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 1 HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 2 HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 3
https://manuals.hannainst.com/HI1006-18 https://manuals.hannainst.com/HI2004-18 https://manuals.hannainst.com/HI7630-28
HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 4 HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 5 HANNA Instruments HI520 Universal Process Controller Multiparameter Platform - QR Code 6
https://manuals.hannainst.com/HI7640-18 https://manuals.hannainst.com/HI7640-58 https://manuals.hannainst.com/HI7640-58

Zondlar seriyası və konfiqurasiyaları

HI10 X X Y 8 Z Z   pH & Temperature   
XX 06 PTFE qovşağı
16 Keramika qovşağı
 

 

Y

Şüşə sensoru Titan uyğun pin pH diapazonu Temperatur diapazonu
1 Aşağı temperatur 0.00 - 12.00 pH -5.0 ilə 80.0 °C arasında
(23.0 - 176.0 °F)
3 Yüksək temperatur 0.00 - 14.00 pH 0.0 ilə 100.0 °C arasında
(32.0 - 212.0 °F)
4 Flüor davamlıdır 0.00 - 10.00 pH –5.0 - 60.0 °C (23.0 - 140.0 °F)
HI20 X X Y 8 Z Z  ORP & Temperature
XX 04 PTFE qovşağı
14 Keramika qovşağı
 

Y

Sensor növü mV diapazonu Temperatur diapazonu
1 Platin ± 2000 mV -5.0 ilə 100.0 °C arasında
(23.0 - 212.0 °F)
2 Qızıl
HI20 X X Y 8 Z Z  ORP & Temperature
XX 04 PTFE qovşağı
14 Keramika qovşağı
Y Sensor növü mV diapazonu Temperatur diapazonu
1 Platin ± 2000 mV -5.0 ilə 100.0 °C arasında
(23.0 - 212.0 °F)
2 Qızıl
HI7640 - 5 8 Z Z  Optical DO & Temperature
Optical DO sensor Concentration 0.00 to 50.00 mg/L (ppm)
Saturation      0.0 to 500.0 %
Temperature –5.0 to 50.0 °C (23.0 to 122.0 °F)
8 Smart probe, with RS-485 connection
ZZ 00 DIN konnektoru ilə təchiz olunub (kabelsiz)
05, 10, 15, 25, 50 sabit kabel uzunluğu (metrlə)
02, 05, 10 fixed cable length (in meters) › HI7660-28 TU probe only

HANNA Instruments LogoHanna Instruments Inc., 584 Park East Drive, Woonsocket, RI 02895 ABŞ
www.hannainst.com

Sənədlər / Resurslar

HANNA Instruments HI520 Universal Proses Nəzarətçisi Çoxparametrli Platforması [pdf] İstifadəçi təlimatı
HI520-0320, HI520-0540, HI520 Universal Prosesə Nəzarətçi Çoxparametrli Platforma, HI520, Universal Prosesə Nəzarətçi Çoxparametrli Platforma, Nəzarətçi Çoxparametrli Platforma, Çoxparametrli Platforma, Platforma

İstinadlar

Şərh buraxın

E-poçt ünvanınız dərc olunmayacaq. Tələb olunan sahələr qeyd olunub *