Roth-loqosu

Roth QuickTemp Compact System

Roth-QuickTemp-Compact-System-Product

Məhsulun spesifikasiyası

  • Ölçülər: 61 sm x 61 sm x 40 sm
  • Maximum load: 2mm per meter
  • Montaj tələb olunur

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Döşəmə alt hissəsini tozsoranla təmizləyin. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Plitələr arasındakı yivlər hizalanmalıdır.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Boşluqları doldurmaq üçün qidalandırıcı borular üçün ötürücü lövhələrdən istifadə edin.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Borunu növbə ilə daxili dairəyə sıx/yaxın şəkildə quraşdırın.

Roth-QuickTemp-Compact-System-Fig- (11)

Boruları quraşdırın və təzyiq testi aparın.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Quraşdırma addımları

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Check for stability and make adjustments if necessary.
  8. Your product is now ready for use!

Tez-tez verilən suallar

Məhsulun maksimum yükləmə qabiliyyəti nə qədərdir?

The maximum load capacity is 2mm per meter.

Montaj üçün hər hansı əlavə alətə ehtiyacım varmı?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Məhsulu saxlama üçün sökmək olarmı?

Yes, the product can be disassembled following the reverse order of the installation steps.

Sənədlər / Resurslar

Roth QuickTemp Compact System [pdf] Quraşdırma təlimatı
QuickTemp Compact System, QuickTemp, Compact System, System

İstinadlar

Şərh buraxın

E-poçt ünvanınız dərc olunmayacaq. Tələb olunan sahələr qeyd olunub *