SKMEI 13 Rəqəmli Versiya 3 İstismar Təlimatına baxın
Giriş
The SKMEI “13 Digits Version 3” digital watch presents a distinctive large‑digit display that covers hour, minute, second, month, date and weekday hence the “13 digits” name. According to the manual for the previous version (Version 2), the features include the full calendar (year 2000 to 2099), 12/24‑hour format, stopwatch (1/100 sec) with split timing, dual‑time mode, countdown timer (up to 24 h), daily alarm(s), hourly chime, and EL back‑light.
(13-digit watch dial)
Xüsusiyyətlər
- 13 Digits, Hour, Minutes, Seconds, Month, Day, and Week
- Daily Alarm, Month & Date Alarm, and Chime hourly
- Bölmə sayı ilə 1/100 saniyəlik xronoqraf
- Second Time (DT) function
- Geri sayma (Yuxarı limit: 24H)
- 2000—-2099 Təqvim, 12/24H
- EL arxa işıq
Əməliyyat təlimatı
- At any station, press the A key, the EL backlight on for 3 seconds.
- In Normal time Mode, press the B key to convert the MODE as follows:
Vaxt və tarix təyini
- In Normal time Mode, press the D key to convert 12H/24H; “P” means 12H
- In Normal time Mode, hold the C key till the Minutes flash, then enter Time & Date setting Mode.
- Press B to choose Hours – Minute-Year-Month-Date, Press D Key to adjust the data.
- Çıxmaq üçün C düyməsini basın.
Siqnal ON/OFF
- In Alarm Mode, press the C key to ON/OFF Alarm function.
- Əgər “
” symbol appears, it means the ALM function is ON; otherwise means OFF. - When the Alarm function is chiming, the symbol will be flashing and chiming for 10s, press any key to stop.
Siqnal qəbulu
- In Alarm Mode, hold the C key till the alarm Hours flash, and enter the Alarm setting.
- Press B to choose Alarm Hour — Minute–Month–Date. Press the D Key to adjust the data.
- When you are setting the Alarm Hour, pay attention to AM/PM
- When you are setting the Alarm Month and Date, if you set the data of Month& Date, then on that Month& Date alarm will, if no data, then it means the Month& Date alarm function.
- If you turn on the Alarm function, the alarm symbol will show in each Mode.
- Çıxmaq üçün C düyməsini basın.
Xronoqraf funksiyaları
In Normal Mode, press the B key twice to enter Chronograph Mode
- Press D to start, press D again to suspend, press D again to continue, press D to suspend again. When suspended, press the C key to return to 0:00:00.
- In Chronograph mode, press D key to start, press C key enter into split function, and the “SPL” symbol appear, press C key again to get the first group record,b ut the second group still processing in the back ground, press C key again to continue the second group, press C key again to read the second group record……when the final group finished, Press D key to stop the SPL function, press C key read the final group(SUM) record, press C key again to clear the record to zero.
İkinci Dəfə Ayarı
- In Second Time Mode, in the corner, the symbol “DT”
- Hold the C key till the Hour flash, then enter into DT time setting Mode
- Saat – Dəqiqə seçmək üçün B düyməsini basın, məlumatları tənzimləmək üçün D düyməsini basın
- Çıxmaq üçün C düyməsini basın.
Geri sayma ayarı
- In Count down Mode, in the corner, the symbol “TR”
- Hold the C key till the Hour flashes, then enter into TR time setting Mode
- TR Saatları – Dəqiqə seçmək üçün B düyməsini basın, məlumatları tənzimləmək üçün D düyməsini basın
- Press the C key to exit the setting, press the E key to start the countdown, pressthe D key again to suspend, press the D key to start again
- After you suspend the countdown, press Cthe key to stop the ccountdownback to the countdown time setter. You start the countdown, press M back to Normal Time Mode, and the countdown is working in the background.
- Countdown time could be set between 1 minute to 24. If you wanna to set the countdown time setting in 224 hoursthen set the countdown time ito to0:00:00
- After you finish the countdown to 0:00:00, the watch will chime for 15s, press any key to stop the chime, and back to the countdown time you are setting.
TEZ VERİLƏN SUALLAR
What features does the SKMEI 13 Digits Version 3 watch include?
The SKMEI 13 Digits Version 3 watch offers features such as hour/minute/second display along with month, date, and day of week; a full-calendar covering years 2000–2099; dual time; 12/24-hour format switchable; 1/100-second chronograph (stopwatch); countdown timer (up to 24 h); hourly chime and daily alarm.
How do I set the time and date on the SKMEI 13 Digits Version 3 watch?
In normal Timekeeping Mode, hold down the C key until the seconds digits flash. Use the B key to cycle through seconds → hours → minutes → year → month → day. Use the D key to adjust each flashing value. Press C again to exit setting mode. Also, while in Timekeeping Mode press D to toggle between 12-hour (with P indicator for PM) and 24-hour format.
What should I do if the stopwatch or countdown timer isn’t working properly?
For the stopwatch (chronograph): In Normal Mode press B twice to enter Chronograph Mode. Press D to start/stop; press C to activate split (SPL) while timing; press D again to stop; then press C to reset to zero.